|
|
We carry thousands of products.
Hundreds of which aren't listed.
If you don't see what you are looking for call!
|
|
|
ProceduresSHAMPOOING
Tools - PPE | Wet Floor Signs| Extension Cords | Vacuum | Measuring Cup | Spray Device | 175 RPM Buffer | Shampoo Block | Floor Fan | Shampoo Chemical
Description
Gather all of your Tools. Use PPE (Personal Protective Equipment). Place wet floor or caution Signs in appropriate areas. Vacuum the area that will be treated and cleaned. Spot areas that are concentrated spots. Prespray the area to be cleaned. Mix the shampoo chemical properly and place in the solution tank of the 175 RPM buffer. Shampoo the area with overlapping passes. Clean Up the equipment after use. Let the floor Dry overnight. Vacuum the following day when the carpet is dry to remove the shampoo foam that has dried into the carpet.
PPE
What to do: Wear protective equipment, such as goggles or safety glasses, and gloves.
Why: To protect yourself from chemical contact.
Reason: To reduce the risk of having an adverse reaction to chemical that one has come into contact with.
Signs
What to do: Place wet floor signs in appropriate areas and use barrier tape where needed.
Why: To alert passers by that there is a wet floor or that there is work in progress.
Reason: To protect passers by from slip and fall incidents.
Vacuum
What to do: Vacuum area that will be treated.
Why: To pick up debris and soil that may be in the carpet.
Reason: To prevent staining and excess soil from soaking into the carpet.
Spot
What to do: Spot clean areas that are heavily spotted such as, coffee stains, juice, and etcetera.
Why: To reduce the amount of soil that will remain in the carpet after extraction.
Reason: Spotters are highly concentrated cleaners that will attack a concentrated area of staining, where as presprays are for areas that have patterns trafficked into them.
Prespray
What to do: Prespray carpet.
Why: The prespray will work on the soils in heavily trafficked areas.
Reason: Allows the chemical to facilitate the cleaning process by helping to break down the soils.
Mix
What to do: Mix shampoo cleaner according to directions. NO MORE, NO LESS. Place solution in solution tank of buffer.
Why: Properly mixed chemical will work better.
Reason: Chemical that is mixed properly will react better with the environment it was intended to work with.
Shampoo
What to do: Dispense chemical from tank to the carpet while using a shampoo block. Clean with overlapping passes.
Why: The fibers from the bock with agitate the chemical and create a foamy base.
Reason: The foam will attract the soils from the carpet and the fibers from the shampoo block give the carpet a deep clean. This procedure is similar to washing your hair with shampoo and using your fingers.
Clean Up
What to do: Rinse and wash all equipment.
Why: So the equipment will be clean and uncontaminated for the next use.
Reason: Clean equipment represents the people that use it and extends the life of the equipment.
Dry
What to do: Allow carpet to dry before introducing traffic to the floor. Place a fan on the carpet to facilitate dry time.
Why: The fan will facilitate dry time.
Reason: By speeding up dry time one reduces the chances of mold and re-soiling from traffic.
Vacuum
What to do: Vacuum area that has dried.
Why: To pick up the dried up shampoo foam in the carpet.
Reason: To remove the foam so the carpet is free of shampoo and doesnt continue to grab soil.
|
|
|
|
|
|
